Similar product

ML50

LP1

ML411A

Heliport Beacon product specification PDF

Mechanical

IP Protection IP66

Operating Temperature -40℃~55℃

Wind Load 80m/s

Weight 1.5 kg

Overall Dimensions (mm) 210mmx210mmx140mm

Installation Dimensions (mm) 126mmx126mmxM10

Technical characteristics and operation mode

The light source is made of imported LEDs, with a strong light (100Lm/W), with a light source life of 100,000,000 flashes. It is widely used in the field of domestic and international aviation.

Flash frequency 4 times/2 seconds

Electric

Operating voltage 48VDC or 230VAC (other options available

Power consumption ≤15W

The lamp with surge protection device (7.5KA/ 5 flashes, Imax 15KA) can be used in harsh environments.

Conformity with ICAO Annex 14 standards

The heliport light is marked with a flashing white light, which can be used for visual guidance over long distances. This is especially important when ambient lighting makes it difficult to identify the heliport. According to regulations (ICAO), an airport beacon must be installed for each heliport. The beacon must be located on or near the heliport, preferably in an elevated position, and must ensure that the pilot is not blinded by the view over a short distance.

27 April 2021

Heliport Beacon

The Role of a Heliport Beacon on Aviation

The heliport beacon is marked with a flashing white light, which can be used for visual guidance over long distances. This is especially important when ambient lighting makes it difficult to identify the heliport. According to regulations (ICAO), an airport beacon must be installed for each heliport. The beacon must be located on or near the heliport, preferably in an elevated position, and must ensure that the pilot is not blinded by the view over a short distance.